Studi Kasus Jaringan dengan 2 Router Cisco

Bismillah..

Kali ini saya akan share setting router cisco dengan studi kasus 2 router, 2 server dan masing-masing router mempunyai klient seperti gambar dibawah ini:

Kita setting router yang pertama dulu ya, seperti ini:

Router>enable 

Router#configure terminal 

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#hostname 

% Incomplete command.

Router(config)#hostname router_PT.ABC_CabangBekasi

router_PT.ABC_CabangBekasi(config)#interface fa0/1

router_PT.ABC_CabangBekasi(config-if)#ip address 192.168.0.1 255.255.255.252

router_PT.ABC_CabangBekasi(config-if)#no shutdown 

%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up

router_PT.ABC_CabangBekasi(config-if)#exi

router_PT.ABC_CabangBekasi(config)#

router_PT.ABC_CabangBekasi(config)#interface fa0/0

router_PT.ABC_CabangBekasi(config-if)#ip address 192.168.1.1 255.255.255.0

router_PT.ABC_CabangBekasi(config-if)#no shutdown 

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

router_PT.ABC_CabangBekasi(config-if)#write memory 

Building configuration...

[OK]

Router yang kedua juga kta setting seperti dibawah ini:

Router>enable 

Router#configure terminal 

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#hostname router_PT_ABC_CabangCileungsi

router_PT_ABC_CabangCileungsi(config)#interface fa0/1

router_PT_ABC_CabangCileungsi(config-if)#ip address 192.168.0.2 255.255.255.252

router_PT_ABC_CabangCileungsi(config-if)#no shutdown 

%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up

router_PT_ABC_CabangCileungsi(config)#interface fa0/0

router_PT_ABC_CabangCileungsi(config-if)#ip address 192.168.2.1 255.255.255.0

router_PT_ABC_CabangCileungsi(config-if)#no shutdown 

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

router_PT_ABC_CabangCileungsi(config)#exi

router_PT_ABC_CabangCileungsi#

router_PT_ABC_CabangCileungsi#write memory 

Building configuration...

[OK]

router_PT_ABC_CabangCileungsi#

Nah, ip server dan client di setting sesuai dengan alokasi ip dari router masing-masing.

Silahkan dipraktekkan ya, kalau pengen tau detailnya bisa belajar di YMII Course Center Cileungsi ambil paket komputer jaringan. :)

Info Kursus Hubungi : 0858-8188-5768